Composite mesh: buy from the manufacturer ETIZ — price, sizes and formats

A composite (fiberglass) mesh is a flexible reinforcing web made of composite rods or fiberglass-based tapes. Unlike metal welded mesh or netting mesh, composite mesh is non-corrosive, dielectric, and does not form cold bridges in the structure. It is lighter than metal, rolls for easy transportation and is cut directly on site. This article is a commercial guide: what are the formats, what does the price depend on and how to buy composite mesh from the manufacturer ETIZ with delivery.

What composite mesh does ETHYZ have

ETIZ plant produces two main families of reinforcing composite meshes. It is important not to confuse them with rod composite reinforcement, sheet or paint serpyanka — here we are talking about the fabric for reinforcing concrete and masonry.

SSC reinforcement mesh (glass composite)

Mesh of composite rods with a diameter of 2 to 6 mm, brands SSK-2, SSK-3, SSK-5 and SSK-6. Available with mesh 50×50, 100×100 and 200×200 mm, supplied in rolls and cards, color — black or green. It is used for reinforcement of screeds, floors, garden paths, blind areas, concrete platforms and roadway. Such a mesh replaces the metal one without the risk of rust spots on the concrete surface.

Masonry mesh (fiberglass/basalt)

Narrow reinforcing tapes with a width of 0.36, 0.5 and 1 m in rolls of 50 m. Tensile strength — up to 50/50 kN/m. The masonry mesh is laid in horizontal joints when erecting walls of brick, aerated concrete and foam block: it distributes the load and increases the crack resistance of the masonry, without creating cold bridges at the border of the joint.

Dimensions, formats and specifications

Below is a summary table of the two families to make it easier to choose a size before buying a composite mesh.

ETIZ composite mesh complies with GOST 31938-2012 (composite polymer reinforcement and products based on it). The exact format is selected for the task: for screed, a cell of 100×100 mm is more often taken, for paths and platforms with increased load — 50×50 mm, for the distribution layer — 200×200 mm.

Factors That Affect Price

The cost of composite mesh is calculated individually and depends on several factors. Therefore, the price is indicated "on request" — so you get an accurate estimate for your volume, and not an average price.

• Type and brand of mesh — SSC reinforcing net or masonry tape, rod diameter (Ø2 or Ø3 mm).
• Сell size — 50×50, 100×100 or 200×200 mm: the denser the mesh, the more material per square meter.
• Delivery format ** — roll or map, width and length of the canvas.
• Volume of the order — for large batches, the conditions are more favorable.
• Delivery — region and method of shipment. The mesh is rolled and weighs less than metal, which reduces transportation costs.

Why it is profitable to buy a composite mesh instead of a metal one

Composite mesh solves the main problem of steel welded mesh and netting — corrosion. The metal eventually rusts inside the concrete, swells and destroys the structure, and red spots appear on the surface. The composite is devoid of this.

• Does not rust or corrode — serves the entire life of the structure.
• Dielectric — non-conductive, radiotransparent.
• Lighter than metal — easier unloading, installation and transportation.
• Without cold bridges — important for masonry and insulated structures.
• Flex. — supplied in a roll, cut with scissors or grinder directly on site.
• Durable and resistant to aggressive environments.

It is important to take into account: the composite mesh can not be cooked — the connections are made by viscous, clamps or overlapping. On the contrary, it is convenient to cut the canvas with scissors or a grinder without a special tool.

How to buy composite mesh from ETHYZ

ETIZ is a manufacturer, so you buy the grid without an intermediary markup and with a guarantee of compliance with GOST. The procedure is simple:

1. Define the task — screed, walkway, blind area or masonry joint.
2. Select the type and standard size: SSC reinforcement grid with the desired cell or masonry tape in width.
3. Leave a request — the manager will calculate the price for your volume and format.
4. Approve delivery to your area.

You can view the range and leave a request in the catalog of composite grids: Composite meshes. If you are not sure about the choice of a cell or format — specialists eTHYZ plant will select a solution for your structure and load.

Summary

ETHYZ composite mesh is a non-corrosive replacement of metal welded mesh for concrete and masonry. Two families (SSC reinforcing net and masonry tape), three cell sizes, delivery in rolls and cards, price — on request for your volume. It is more profitable to buy directly from the manufacturer with the calculation of the estimate and delivery.

FAQs

How much does a composite mesh cost and why is the price "on demand"?

The price of the composite mesh is calculated individually, because it depends on the type (SSC reinforcing mesh or masonry tape), mesh size, delivery format and order volume. Specifying the average price is incorrect — you will overpay or receive an inaccurate estimate. Leave a request in the ETIZ catalog, and the manager will calculate the cost for your standard size and delivery region.

What are the cell sizes and formats of the SSC reinforcement grid?

SSC reinforcing net is produced from bars Ø2-6 mm with a cell of 50×50, 100×100 and 200×200 mm in the brands SSC-2, SSC-3, SSC-5 and SSC-6. Delivery — in rolls and maps of standard formats: 0.5×2, 0.5×15, 1×2, 1×15, 2×30, 1.35×50 m and others. The color is black or green. The format is selected for a specific task and load.

How is composite mesh better than metal mesh?

The composite mesh does not rust or corrode, so it does not destroy the concrete from the inside and does not give red spots on the surface. It is dielectric, lighter than metal, does not form cold bridges and comes in a roll — convenient to carry, unload and mount. This is a high-quality replacement of steel welded mesh and chipper without the risk of corrosion.

Is it possible to cut and cook composite mesh?

You can cut the composite mesh directly on the object with ordinary scissors or a grinder — this is convenient and does not require a special tool. But it is impossible to cook the composite: the connection of the canvases is made overlapping, viscous or with clamps. This is a normal practice for the installation of composite reinforcement and does not affect the final strength of the structure.

What is masonry composite mesh used for?

Masonry fiberglass or basalt mesh is narrow tapes with a width of 0.36, 0.5 and 1 m in rolls of 50 m each with a tensile strength of up to 50/50 kN/m. It is laid in horizontal joints when laying bricks, aerated concrete and foam block. The mesh increases the crack resistance of the walls and, unlike metal, does not create cold bridges on the seam line.

Where to buy composite mesh directly from the manufacturer?

Composite mesh can be purchased from the ETIZ plant without a margin of intermediaries and in compliance with GOST 31938-2012. In the catalog at etiz.ru/compozit/catalog/setki/, the SSC reinforcement grid and masonry grid are available. It is enough to choose a standard size, leave a request — the manager will calculate the price for your volume and agree on the delivery to the desired region.