COMPOGLASS composite sheet, CRYSTAL series
Colour: Brown RAL 3009 / Thickness: 0,8 mm / Size: 1200×2000 mm
Composite mesh calculator
Surface area calculation:
How to measure correctly
Surface
Add an overlap at the edges
How to measure correctly
To make the calculation as accurate as possible, follow these steps:
1. Surface
A surface is a separate area that needs to be covered with mesh
(a wall, an opening, a partition, etc.).
If there are several surfaces, add each one separately.
2. Surface length (m)
Measured horizontally — from one edge of the surface to the other.
Measure along the actual mesh installation line.
3. Surface width (m)
Measured vertically — from the lowest point of the surface to the highest.
4. Rod diameter
Select the composite rod diameter from the list.
5. Mesh spacing
The distance between adjacent rods of the mesh.
6. Number of layers
Specify how many layers of mesh you plan to use.
7. Edge overlap
If the mesh is laid with an overlap, select the required percentage.
For better accuracy, measure each value twice.
Material calculation
This calculation is for guidance only; for exact figures please talk to a manager
-
Total area to cover
24 m² -
Number of packs
5pcs
