COMPOGLASS composite sheet, CRYSTAL series
Colour: Brown RAL 3009 / Thickness: 0,8 mm / Size: 1200×2000 mm
ETIZ foam glass calculator
Enter the roof dimensions
How to measure correctly
Roof slopes
Insulation thickness
Insulation type
How to measure correctly
For the most accurate result, follow these steps:
1. Number of roof slopes
A slope is one plane of the roof.
If the roof has several slopes, add each one separately.
2. Slope length (m)
Measured in a straight line from the ridge to the eaves.
Measure along the slope surface, not along the ground.
3. Slope width (m)
Measured along the ridge, from one edge of the slope to the other.
4. Insulation thickness
Choose the thickness of insulation you need.
Pack quantity calculation
This calculation is for guidance only; for exact figures please talk to a manager
-
Total area to cover
0 m² -
Number of packs
0pcs
Enter the façade dimensions
How to measure correctly
Wall
Insulation thickness
Insulation type
How to measure correctly
1. Wall length (m)
Measured in a straight line from one corner to the other.
If the wall has projections or recesses, measure each section separately.
2. Wall height (m)
Measured from ground level to the top of the surface being clad.
If the height varies along the wall (a slope), give the maximum figure.
Pack quantity calculation
This calculation is for guidance only; for exact figures please talk to a manager
-
Total area to cover
0 m² -
Number of packs
0pcs
Recommended material
COMPOGLASS composite sheet, CRYSTAL series
Colour: Brown RAL 3009 / Thickness: 0,8 mm / Size: 1200×2000 mm
Total price:28 905 ₽
